Relying on the advanced motion control technology of Real-Time Man Intelligent Control Technology Co., Ltd (Rtimeman), Agilebot Robotics has the world's first Single Chip Multiaxis Integrated Motion Controller (SCIMC), which is the world's first single-chip multi-axis integrated motion controller (Single Chip Multiaxis Integrated Motion Controller), and is equipped with high-efficiency motion planning algorithms and advanced dynamics algorithms, resulting in a high-performance robot with a high level of quality and cost-efficiency.
Agilebot Robotics provides three series of SCARA, PUMA, and COBOT, and related program consulting and design, installation and commissioning, maintenance, spare parts, and retrofit services.
Robot maintenance is required annually under normal use to maintain good operating condition.
Yes, please contact us for details.
Agilebot Robotics communicates with the vision system via standard TCP/IP protocol, supporting mainstream vision brands such as Dahua, Elson, Mecamand, Cognex, Omron, Keens, Panasonic, Hikvon, and so on.
1. Save labor; 2. Reduce cost;3. Improve production quality and efficiency ; 4. Convenient management.
Network communication (Modbus TCP, TCP/IP)
P7A series body IP67, control cabinet IP20; P20 overall IP65, wrist IP67, control cabinet IP54; SCARA series body and control cabinet are IP20; Collaboration series IP67, control cabinet IP54.
1. Check the name plate of the robot control cabinet and confirm the input and output signal type of the control cabinet (NPN or PNP);
2. Check whether the solenoid valve and relay control voltage is consistent with the control cabinet output voltage;
3. Check the manual according to the control cabinet input and output signal type, confirm the signal common port (COM) wiring is correct, confirm the signal wiring pin port is correct;
4. Check whether the IO signal number and mapping start port number are correct.
1. Check the nameplate of the robot control cabinet and confirm the input and output signal type of the control cabinet (NPN or PNP);
2. Check whether the sensor output type is consistent with the control cabinet type;
3. Check the manual to confirm the signal common port (COM) wiring is correct according to the control cabinet input/output signal type, and confirm the signal wiring pin port is correct;
4. Check whether the IO signal number and mapping start port number are correct.
1. Check whether the robot IP address and the third party settings are in the same network segment or whether there is any conflict in the IP address;
2. Click Menu-Communication-Bus Configuration-Configuration on the robot teach pendant to check whether the function is active or not, and the correct status should be active;
3. Click Menu-Communication-IO Mapping on the Teach Pendant, and enter the IO Mapping configuration page to confirm whether the module number is selected as “ModbusServer/TCP/128/256in:256out”;
4. Check whether the IO signal number and mapping start port number are correct.
1. Robot nameplate 2. Failure frequency and condition 3. Log and program 4. Operating conditions and location of equipment
Please contact the after-sales staff.
1. Use the official website to self-repair;
2. Contact the project manager or technical service personnel of the project;
3. Call China customer service hotline 400-996-7588 to after-sales service;
4. Contact the robot's distributor.
The standard warranty period for robots is 12 months, subject to the sales contract.
We provide a response within 12 hours (response refers to the service personnel to the customer to confirm the service needs, and reply to the solution), the response to arrive at the scene within 24 hours, 24 hours to arrive at the scene is limited to the Yangtze River Delta region of the working hours of the repair, except by force majeure factors. (Limited to China region)
上海捷勃特機(jī)器人有限公司 滬ICP備2020034948號(hào)-2